How to replace a sprinkler timer
A water sprinkler or an irrigation sprinkler is an innovative way to water farmlands, crops, lawns, and many other areas. This type of irrigation is used when one needs to provide water to crops like natural rain. Irrigation through sprinklers follows a network of pipes to distribute water to the required locations.
Required steps to change the sprinkler timer
Prepare a program
Before you begin with replacing the timer, you should note down the program of the timer. The timer program includes information about the day of the week, start timing, and the contributed time to all zones of an area. Noting down the program helps you set the device on the same setting for later use. Moreover, if you cannot do it on your own, consider our lawn sprinkler timer replacement in Orlando.
Disconnect the device from the power source
This step requires you to disconnect the power. To do so, first of all, shut off the power from the breaker. Kindly check that you have successfully turned off the power on the controller. If you are not knowledgeable about dealing with electricity, you should not put your life at risk. Avail of our sprinkler timer replacement in Orlando to make yourself safe from electrical danger. Moreover, after disconnecting the power, take out the sprinkler valves.
Label wires
It would help if you labeled the field wires after unplugging them from the controller. Find the COMMON and the Push Start wire and mark them as well.
Install the new timer in the sprinkler
Replace the old-timer with the new one. The new timer should be of the same model that fits the system. You get an instruction manual to install the new unit correctly. Follow the directions available in the manual and perform a successful installation.
Conclusion
It is an easy and short guide to replace the sprinkler timer yourself. If you want professional help for lawn sprinkler timer replacement in Orlando, contact us at our official website.
Comments
Post a Comment